Water supply

Share with others

How to reach us

Wilo Middle East FZE

Jebel Ali Free Zone - South JAZFA New Showroom S3A1SR02 PO Box 262 720
Dubai

> Download business card

Rainwater utilization

Garden irrigation and cleaning outdoor areas — clever, inexpensive and environmentally friendly with rainwater.

Rainwater utilization systems from Wilo pump water directly to the extraction points on the property. The wise utilization of rainwater is clever, inexpensive and environmentally friendly. With specially designed systems from Wilo, about 50% of the daily water requirement can be covered using rainwater. This way, you can protect the environment and your household budget.

Inexpensive and environmentally-friendly: Put your trust in rainwater

Regenwasser

Use the valuable liquid that nature provides: With rainwater, you can irrigate your garden and clean your outdoor areas, like patios or garden paths - an inexpensive and environmentally-friendly alternative to using potable water.

A rainwater reservoir from Wilo uses natural resources

A rainwater reservoir in combination with a demand-based rainwater utilization system ensures uniform, low-noise irrigation. Sprinkling, watering, irrigating and cleaning - where potable water is too expensive, rainwater utilization is recommended, with a complete system from Wilo.

Regenwasser ist vielseitig einsetzbar

Did you know...

... that a four-person household in Germany can save up to 70,000 liters of potable water per year by using rainwater? The actual amount depends on the location and size of the usable roof area.

Rainwater can be used in a wide range of applications

Rainwater can be used to flush toilets, wash clothes and irrigate gardens. There are also many utilization options in industry and business.

 

 

Wilo-COE-2 EMHIL
COE-2 EMHIL

Design

Ready for connection, non self-priming water-supply unit with 2 parallel-switched, horizontally arranged high-pressure multistage centrifugal pumps with fixed speed in glanded design of the MHIL series, equipped with two ElectronicControl switchgears for speed control.

Application

  • Fully automatic water supply and pressure boosting in residential buildings and small commercial locations.
  • Pumping of drinking water and clean process water and other water mixtures that do not chemically or mechanically attack the materials used and do not contain any abrasive or long-fibre constituents

Special features / product benefits

  • Fully automatic water supply and pressure boosting in residential buildings and small commercial locations.
  • Pumping of drinking water and clean process water and other water mixtures that do not chemically or mechanically attack the materials used and do not contain any abrasive or long-fibre constituents

Technical data

  • Mains connection 1~ 230 V, 50 Hz/60 Hz
  • IE2 standard motor for 3~ 230 V, from 0.75 kW
  • Fuse A, AC 3 on mains side according to motor power and EVU regulations
  • Max. fluid temperature +50 °C
  • Operating pressure 10 bar
  • Inlet pressure 6 bar
  • R2'' nominal connection diameter
  • Protection class: IP 54
Wilo-COE-2 MHIL BC
COE-2 MHIL BC

Design

Ready for connection, non self-priming water-supply unit with 2 parallel-switched, horizontally arranged high-pressure multistage centrifugal pumps with fixed speed in glanded design of the MHIL series, equipped with BC switchgear.

Application

  • Fully automatic water supply and pressure boosting in residential buildings and small commercial locations.
  • Pumping of drinking water and clean process water and other water mixtures that do not chemically or mechanically attack the materials used and do not contain any abrasive or long-fibre constituents.

Special features / product benefits

  • Fully automatic water supply and pressure boosting in residential buildings and small commercial locations.
  • Pumping of drinking water and clean process water and other water mixtures that do not chemically or mechanically attack the materials used and do not contain any abrasive or long-fibre constituents.

Technical data

  • Mains connection 3~400 V, 50 Hz or 1~230 V, 50 Hz
  • IE2 standard motor for 3~ from 0.75 kW (for 1~ : IE1 standard motor)
  • Fuse A, AC 3 on mains side according to motor power and EVU regulations
  • Max. fluid temperature of +50 °C (+70 °C optional)
  • Operating pressure 10 bar
  • Inlet pressure 6 bar
  • R2'' nominal connection diameter
  • Protection class: IP 54
Wilo-Economy COE-2 TWI 5
Economy COE-2 TWI 5

Design

Pressure boosting system with two parallel submersible pumps (suitable for installation outside water), vertical, non-self-priming, made of stainless steel, water-cooled and low-noise. Mounted on a base frame, with complete pipework including all hydraulic components, central switchgear, pressure switch and all cabling.

Application

Pressure boosting and water supply in residential applications and for small commercial installations where compact construction and a low noise level are necessary.

Special features / product benefits

Pressure boosting and water supply in residential applications and for small commercial installations where compact construction and a low noise level are necessary.

Technical data

  • Volume flow Qmax: 14 m3/h
  • Delivery head Hmax: 68m
  • Mains connection 3~400 V or 1~230 V ±10% 50 Hz
  • Fluid temperature max: +40°C
  • Operating pressure max: 10 bar
  • Nominal connection diameters G 2"
Wilo-EMHIL
EMHIL

Design

Non-self-priming water supply unit with frequency converter

Application

  • Water supply
  • Rainwater utilisation
  • Irrigation and spraying

Special features / product benefits

  • Water supply
  • Rainwater utilisation
  • Irrigation and spraying

Technical data

  • Maximum operating pressure: 10 bar
  • Max. fluid temperature: 40 °C
  • Min. fluid temperature:0 °C
  • Maximum ambient temperature: 50 °C
  • Mains connection: 1~230 V, 50/60 Hz
Wilo-HiPeri
HiPeri

Design

Non self-priming peripheral pump

Application

  • Water distribution/boosting
  • Raw water intake
  • Sprinkling and spraying
  • Rainwater utilisation

Special features / product benefits

  • Water distribution/boosting
  • Raw water intake
  • Sprinkling and spraying
  • Rainwater utilisation

Technical data

  • Max. fluid temperature: 60 °C
  • Ambient temperature: 40 °C
  • Max. operating pressure: 6.5 bar
  • Permanent or intermittent operation
  • Max. connections per hour: 20
  • Suction head: up to 8m
  • Insulation class: 155 (F)
  • Protection class: IPX4
  • Sound-pressure level: LpA < 70dBA
Wilo-Jet FWJ
Jet FWJ

Design

Self-priming water-supply units

Application

For pumping water and rainwater from wells and tanks for:

  • Sprinkling
  • Irrigation and spraying

Special features / product benefits

For pumping water and rainwater from wells and tanks for:

  • Sprinkling
  • Irrigation and spraying

Technical data

  • Mains connection 1~230 V, 50 Hz
  • Inlet pressure max. 1 bar
  • Switch-on pressure 1.5 bar to 2.7 bar
  • Switch-off pressure min. 2.2 bar
  • Fluid temperature +5 °C to +35 °C
  • Max. operating pressure 6 bar
  • Protection class IP 44
  • Pressure-side connection R 1
  • Suction-side connection G 1
Wilo-Jet HWJ
Jet HWJ

Design

Self-priming water-supply unit

Application

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Pumping water from wells and out of low-lying tanks

Special features / product benefits

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Pumping water from wells and out of low-lying tanks

Technical data

  • Mains connection 1~230 V, 50 Hz
  • Suction head max. 8 m
  • Inlet pressure max. 1 bar
  • Start-up pressure 1.5 bar
  • Variable switch-off pressure
  • Fluid temperature +5 °C to +35 °C
  • Max. operating pressure 6 bar
  • Protection class IP 44
  • Connection on pressure side Rp 1
  • Suction-side connection G 1
Wilo-Jet WJ
Jet WJ

Design

Self-priming multistage centrifugal pumps

Application

  • Pumping water from wells
  • Filling, pumping empty, transferring by pumping, irrigation and sprinkling
  • As emergency pump for overflows

Special features / product benefits

  • Pumping water from wells
  • Filling, pumping empty, transferring by pumping, irrigation and sprinkling
  • As emergency pump for overflows

Technical data

  • Mains connection 1~230 V, 50 Hz or 3~400 V, 50 Hz
  • Inlet pressure max 2 bar
  • Fluid temperature max. +5 °C to +35 °C
  • Max. operating pressure 6 bar
  • Protection class IP 44
  • Suction- and pressure-side connection G 1
Wilo-MultiCargo FMC
MultiCargo FMC

Design

Self-priming water-supply unit

Application

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Rainwater utilisation

Special features / product benefits

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Rainwater utilisation

Technical data

  • Mains connection 1~230 V, 50 Hz
  • Inlet pressure max. 1.5 bar
  • Switch-on pressure 1.5 bar to 2.7 bar
  • Switch-off pressure min. 2.2 bar
  • Fluid temperature +5 °C to +35 °C
  • Operating pressure max. 8 bar
  • Protection class IP 44
  • Pressure-side connection R 1
  • Suction-side connection Rp 1
Wilo-MultiCargo HMC
MultiCargo HMC

Design

Self-priming water-supply unit

Application

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Pumping water from wells and out of low-lying tanks

Special features / product benefits

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Pumping water from wells and out of low-lying tanks

Technical data

  • Mains connection 1~230 V, 50 Hz / 3~400 V, 50 Hz
  • Suction head max. 8 m
  • Inlet pressure max. 4 bar
  • Fluid temperature +5 °C to +35 °C
  • Operating pressure max. 8 bar
  • Pressure switch setting range 1-5 bar
  • Protection class IP 54
  • Suction- and pressure-side connection Rp 1
Wilo-MultiCargo MC
MultiCargo MC

Design

Self-priming multistage centrifugal pumps

Application

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Rainwater utilisation

Special features / product benefits

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Rainwater utilisation

Technical data

  • Mains connection 1~230 V, 50 Hz, 3~400 V, 50 Hz
  • Max. inlet pressure of 4 bar
  • Fluid temperature max. +5 °C to +35 °C
  • Max. ambient temperature of +40 °C
  • Max. operating pressure of 8 bar
  • Protection class 1~: IP X4; 3~: IP 54
  • Rp 1 connections on suction and pressure sides
Wilo-MultiPress FMP
MultiPress FMP

Design

Non-self-priming water-supply unit

Application

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Rainwater utilisation

Special features / product benefits

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Rainwater utilisation

Technical data

  • Mains connection 1~230 V, 50 Hz
  • Inlet pressure max. 1.5 bar
  • Switch-on pressure 1.5 bar to 2.7 bar
  • Switch-off pressure min. 2.2 bar
  • Fluid temperature +5 °C to +35 °C
  • Max. operating pressure 10 bar
  • Protection class IP 54
  • Pressure-side connection R 1
  • Suction-side connections Rp 1 for FMP3..; Rp 1¼ for FMP6..
Wilo-MultiPress HMP
MultiPress HMP

Design

Non-self-priming water-supply unit

Application

  • Water supply
  • Sprinkling
  • Irrigation and spraying

Special features / product benefits

  • Water supply
  • Sprinkling
  • Irrigation and spraying

Technical data

  • Mains connection 1~230 V, 50 Hz / 3~400 V, 50 Hz
  • Max. inlet pressure 6 bar
  • Fluid temperature +5 °C to +35 °C
  • Max. operating pressure 10 bar
  • Pressure switch setting range 1-5 bar
  • Protection class IP 54
  • Suction- and pressure-side connection Rp 1
Wilo-MultiPress MP
MultiPress MP

Design

Non-self-priming multistage centrifugal pumps

Application

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Rainwater utilisation

Special features / product benefits

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Rainwater utilisation

Technical data

  • Mains connection 1~230 V, 50 Hz, 3~400 V, 50 Hz
  • Max. inlet pressure of 6 bar
  • Fluid temperature max. +5 °C to +35 °C
  • Max. ambient temperature of +40 °C
  • Max. operating pressure of 10 bar
  • Protection class 1~: IP X4; 3~: IP 54
  • Pressure-side connections Rp 1
  • Suction-side connections: Rp 1 for MP3..; Rp 1¼ for MP6..
Wilo-RainSystem AF 150
RainSystem AF 150

Design

Automatic rainwater utilisation system with run-down tank and 2 self-priming pumps

Application

Rainwater utilisation in multi-family houses and small trade businesses for saving drinking water in conjunction with cisterns or tanks

Special features / product benefits

Rainwater utilisation in multi-family houses and small trade businesses for saving drinking water in conjunction with cisterns or tanks

Technical data

  • Suction head max. 8 m
  • Operating pressure max. 8 bar
  • Protection class: IP 41
  • Connections:

    • Pressure pipe/pressure-side joint tubing R 1 ½
    • Suction side 2 x 1/4G 1
    • Inlets R 1 ¼
    • Overflow connection DN 100

Wilo-RainSystem AF Basic
RainSystem AF Basic

Design

Ready-to-plug rainwater utilisation system

Application

Rainwater utilisation for saving drinking water in conjunction with cisterns or tanks

Special features / product benefits

Rainwater utilisation for saving drinking water in conjunction with cisterns or tanks

Technical data

  • Mains connection 1~230 V, 50 Hz
  • Suction head max. 8 m
  • Operating pressure max. 8 bar
  • Protection class IP 42
  • Connections:

    • Pressure pipe/pressure side Rp 1
    • Suction side R 1/ G 1
    • Drinking water replenishment R ¾
    • Connection overflow DN 70

Wilo-RainSystem AF Comfort
RainSystem AF Comfort

Design

Ready-to-plug rainwater utilisation system

Application

Rainwater utilisation for saving drinking water in conjunction with cisterns or tanks

Special features / product benefits

Rainwater utilisation for saving drinking water in conjunction with cisterns or tanks

Technical data

  • Mains connection 1~230 V, 50 Hz
  • Suction head max. 8 m
  • Operating pressure max. 8 bar
  • Protection class IP 42
  • Connections:

    • Pressure pipe/pressure side Rp 1
    • Suction side R 1/ G 1
    • Drinking water replenishment R ¾
    • Connection overflow DN 70

Wilo-Sub TWI 4
Sub TWI 4

Design

Multistage 4" submersible pump in tie strap version for vertical or horizontal installation

Application

  • For water and drinking water supply from boreholes and rainwater storage
  • Process water supply
  • For municipal water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water in industrial applications
  • For pumping water without long-fibre and abrasive constituents

Special features / product benefits

  • For water and drinking water supply from boreholes and rainwater storage
  • Process water supply
  • For municipal water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water in industrial applications
  • For pumping water without long-fibre and abrasive constituents

Technical data

  • Minimum Efficiency Index (MEI) to ≥ 0.7
  • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
  • Submerged operating mode: S1
  • Fluid temperature: 3‐30 °C
  • Minimum flow rate at motor: 0.1 m/s
  • Max. sand content: 50 g/m3
  • Max. number of starts: 20/h
  • Max. submersion depth: 350 m
  • Protection class: IP 68
  • Pressure connection: Rp 1¼ - Rp 2
Wilo-Sub TWI 5-SE Plug & Pump
Sub TWI 5-SE Plug & Pump

Design

Water-supply system with submersible pump, control and complete accessories

Application

  • Pumping from wells, rainwater storage tanks and vessels
  • Irrigation, sprinkling or pumping out
  • Water supply
  • Rainwater utilisation

Special features / product benefits

  • Pumping from wells, rainwater storage tanks and vessels
  • Irrigation, sprinkling or pumping out
  • Water supply
  • Rainwater utilisation

Technical data

  • Mains connection 1~230 V, 50 Hz
  • Fluid temperature +5 °C to +35 °C
  • Max. operating pressure 10 bar
  • Protection class: IP 68
  • Suction- and pressure-side connection Rp 1
Wilo-Sub TWI 5/TWI 5-SE
Sub TWI 5/TWI 5-SE

Design

5" submersible pump in stainless steel, multistage

Application

Submersible pumps

  • Pumping from wells, rainwater storage tanks and vessels
  • Irrigation, sprinkling and pumping out
  • Water supply
  • Rainwater utilisation

Special features / product benefits

Submersible pumps

  • Pumping from wells, rainwater storage tanks and vessels
  • Irrigation, sprinkling and pumping out
  • Water supply
  • Rainwater utilisation

Technical data

  • Mains connection 1~230 V, 50 Hz / 3~400 V, 50 Hz
  • Fluid temperature max. +5 °C to +35 °C
  • Max. operating pressure 10 bar
  • Protection class IP 68
  • Pressure-side connection Rp 1¼
  • Connection on suction side for SE version Rp 1¼
Wilo-Sub TWU 3
Sub TWU 3

Design

Multistage 3" submersible pump in tie strap version for vertical or horizontal installation

Application

  • For private water supply from boreholes, wells and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • For pumping water without long-fibre and abrasive constituents

Special features / product benefits

  • For private water supply from boreholes, wells and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • For pumping water without long-fibre and abrasive constituents

Technical data

  • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
  • Immersed operating mode: S1
  • Fluid temperature: 3-35 °C
  • Minimum flow rate at motor: 0.08 m/s
  • Max. sand content: 50 g/m3
  • Max. number of starts: 30 /h
  • Max. immersion depth: 150 m
  • Protection class: IP 58
  • Pressure connection: Rp 1
Wilo-Sub TWU 3 HS
Sub TWU 3 HS

Design

Multistage, frequency controlled 3" submersible pump in tie strap version for vertical or horizontal installation

Application

  • For private water supply from boreholes, wells and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • For pumping water without long-fibre and abrasive constituents

Special features / product benefits

  • For private water supply from boreholes, wells and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • For pumping water without long-fibre and abrasive constituents

Technical data

Submersible pump:

  • Supply voltage:
    HS-E…: 1~230 V, 50/60 Hz (connection to the AC mains supply by a frequency converter )
    HS-I…: 1~230 V, 50/60 Hz (direct connection to the AC mains supply)
  • Immersed operating mode: S1
  • Fluid temperature: 3-35 °C
  • Minimum flow rate at motor: 0.08 m/s
  • Max. sand content: 50 g/m3
  • Max. number of starts: 30 /h
  • Max. immersion depth: 150 m
  • Protection class: IP 58
  • Pressure connection: Rp 1

Frequency converter for version "HS-E…“:

  • Mains connection: 1~230 V, 50/60 Hz
  • Output: 3~230 V/max.140 Hz/max.2.2 kW
  • Fluid temperature: 3-50 °C
  • Max. pressure: 8 bar
  • Protection class: IP X5
  • Connection: G 1¼
Wilo-Sub TWU 3 Plug & Pump
Sub TWU 3 Plug & Pump

Design

Water-supply unit with submersible-motor pump, control and complete accessories.

Application

Water-supply unit for

  • Water supply from boreholes, wells and rainwater storage
  • Domestic water supply, sprinkling and irrigation
  • For pumping water without long-fibre and abrasive constituents

Special features / product benefits

Water-supply unit for

  • Water supply from boreholes, wells and rainwater storage
  • Domestic water supply, sprinkling and irrigation
  • For pumping water without long-fibre and abrasive constituents

Technical data

  • Mains connection: 1~230 V, 50 Hz
  • Immersed operating mode: S1
  • Fluid temperature: 3-35 °C
  • Minimum flow rate at motor: 0.08 m/s
  • Max. sand content: 50 g/m3
  • Max. number of starts: 30 /h
  • Max. immersion depth: 150 m
  • Protection class: IP 58
  • Pressure connection: Rp 1
Wilo-Sub TWU 4
Sub TWU 4

Design

Multistage 4" submersible pump in tie strap version for vertical and horizontal installation

Application

  • For water supply from boreholes and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water without long-fibre and abrasive constituents

Special features / product benefits

  • For water supply from boreholes and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water without long-fibre and abrasive constituents

Technical data

  • Minimum Efficiency Index (MEI) ≥ 0.7
  • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
  • Submerged operating mode: S1
  • Fluid temperature: 3‐30 °C
  • Minimum flow rate at motor: 0.08 m/s
  • Max. sand content: 50 g/m3
  • Max. number of starts: 20/h
  • Max. submersion depth: 200 m
  • Protection class: IP 68
  • Pressure connection: Rp 1¼ - Rp 2
Wilo-Sub TWU 4 Plug & Pump
Sub TWU 4 Plug & Pump

Design

Water-supply unit with submersible-motor pump, control and complete accessories.

Application

Water-supply unit for self-sufficient water supply in the domestic sector

  • Washing machines
  • Garden sprinkling
  • Transferring by pumping and filling
  • Taps for process water

Special features / product benefits

Water-supply unit for self-sufficient water supply in the domestic sector

  • Washing machines
  • Garden sprinkling
  • Transferring by pumping and filling
  • Taps for process water

Technical data

  • Minimum Efficiency Index (MEI) ≥ 0.7
  • Mains connection: 1~230 V, 50 Hz
  • Submerged operating mode: S1
  • Fluid temperature: 3‐30 °C
  • Minimum flow rate at motor: 0.08 m/s
  • Max. sand content: 50 g/m3
  • Max. number of starts: 20/h
  • Max. submersion depth: 200 m
  • Protection class: IP 68
  • Pressure connection: Rp 1¼
Wilo-Sub TWU 4-...-GT
Sub TWU 4-...-GT

Design

Multistage 4" submersible pump in tie strap version for vertical and horizontal installation

Application

  • Geothermal applications
  • For water supply from boreholes and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water without long-fibre and abrasive constituents

Special features / product benefits

  • Geothermal applications
  • For water supply from boreholes and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water without long-fibre and abrasive constituents

Technical data

  • Minimum Efficiency Index (MEI) ≥ 0.7
  • Mains connection: 3~400 V, 50 Hz,
  • Submerged operating mode: S1
  • Fluid temperature: 3‐30 °C
  • Minimum flow rate at motor: 0.08 m/s
  • Max. sand content: 50 g/m3
  • Max. number of starts: 20/h
  • Max. submersion depth: 200 m
  • Protection class: IP 68
  • Pressure connection: Rp 1¼
Wilo-Sub TWU 4-QC
Sub TWU 4-QC

Design

Multistage 4" submersible pump in tie strap version for vertical and horizontal installation

Application

  • For water supply from boreholes and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water without long-fibre and abrasive constituents

Special features / product benefits

  • For water supply from boreholes and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water without long-fibre and abrasive constituents

Technical data

  • Minimum Efficiency Index (MEI) ≥ 0.7
  • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
  • Submerged operating mode: S1
  • Fluid temperature: 3‐30 °C
  • Minimum flow rate at motor: 0.08 m/s
  • Max. sand content: 50 g/m3
  • Max. number of starts: 20/h
  • Max. submersion depth: 200 m
  • Protection class: IP 68
  • Pressure connection: Rp 1¼ - Rp 2

Everything good comes from above - cost savings through free water.

Sprinkling, watering, irrigating and cleaning - where potable water is too expensive, rainwater utilization is recommended, with a complete system from Wilo.

Wilo-COE-2 EMHIL
COE-2 EMHIL

Design

Ready for connection, non self-priming water-supply unit with 2 parallel-switched, horizontally arranged high-pressure multistage centrifugal pumps with fixed speed in glanded design of the MHIL series, equipped with two ElectronicControl switchgears for speed control.

Application

  • Fully automatic water supply and pressure boosting in residential buildings and small commercial locations.
  • Pumping of drinking water and clean process water and other water mixtures that do not chemically or mechanically attack the materials used and do not contain any abrasive or long-fibre constituents

Special features / product benefits

  • Fully automatic water supply and pressure boosting in residential buildings and small commercial locations.
  • Pumping of drinking water and clean process water and other water mixtures that do not chemically or mechanically attack the materials used and do not contain any abrasive or long-fibre constituents

Technical data

  • Mains connection 1~ 230 V, 50 Hz/60 Hz
  • IE2 standard motor for 3~ 230 V, from 0.75 kW
  • Fuse A, AC 3 on mains side according to motor power and EVU regulations
  • Max. fluid temperature +50 °C
  • Operating pressure 10 bar
  • Inlet pressure 6 bar
  • R2'' nominal connection diameter
  • Protection class: IP 54
Wilo-COE-2 MHIL BC
COE-2 MHIL BC

Design

Ready for connection, non self-priming water-supply unit with 2 parallel-switched, horizontally arranged high-pressure multistage centrifugal pumps with fixed speed in glanded design of the MHIL series, equipped with BC switchgear.

Application

  • Fully automatic water supply and pressure boosting in residential buildings and small commercial locations.
  • Pumping of drinking water and clean process water and other water mixtures that do not chemically or mechanically attack the materials used and do not contain any abrasive or long-fibre constituents.

Special features / product benefits

  • Fully automatic water supply and pressure boosting in residential buildings and small commercial locations.
  • Pumping of drinking water and clean process water and other water mixtures that do not chemically or mechanically attack the materials used and do not contain any abrasive or long-fibre constituents.

Technical data

  • Mains connection 3~400 V, 50 Hz or 1~230 V, 50 Hz
  • IE2 standard motor for 3~ from 0.75 kW (for 1~ : IE1 standard motor)
  • Fuse A, AC 3 on mains side according to motor power and EVU regulations
  • Max. fluid temperature of +50 °C (+70 °C optional)
  • Operating pressure 10 bar
  • Inlet pressure 6 bar
  • R2'' nominal connection diameter
  • Protection class: IP 54
Wilo-Economy COE-2 TWI 5
Economy COE-2 TWI 5

Design

Pressure boosting system with two parallel submersible pumps (suitable for installation outside water), vertical, non-self-priming, made of stainless steel, water-cooled and low-noise. Mounted on a base frame, with complete pipework including all hydraulic components, central switchgear, pressure switch and all cabling.

Application

Pressure boosting and water supply in residential applications and for small commercial installations where compact construction and a low noise level are necessary.

Special features / product benefits

Pressure boosting and water supply in residential applications and for small commercial installations where compact construction and a low noise level are necessary.

Technical data

  • Volume flow Qmax: 14 m3/h
  • Delivery head Hmax: 68m
  • Mains connection 3~400 V or 1~230 V ±10% 50 Hz
  • Fluid temperature max: +40°C
  • Operating pressure max: 10 bar
  • Nominal connection diameters G 2"
Wilo-RainSystem AF 400
RainSystem AF 400

Design

Automatic rainwater utilisation system with run-down tank and 2 non-self-priming pumps

Application

Commercial and industrial rainwater utilisation for conserving drinking water as a hybrid system in conjunction with rainwater storage tanks or vessels

Special features / product benefits

Commercial and industrial rainwater utilisation for conserving drinking water as a hybrid system in conjunction with rainwater storage tanks or vessels

Technical data

  • Operating pressure max. 10 bar
  • Protection class: IP 54
  • Connections:

    • Pressure pipe/pressure-side joint tubing R 1 ½
    • Inflow pipe HT 50
    • Overflow connection DN 100

A clean solution: Rainwater for cleaning and irrigation

The sensible utilization of rainwater with specially designed systems is inexpensive and is good for the environment. A rainwater utilization system combines modern technology with ecological awareness.

Rainwater absorbs detergents especially well

Thanks to intelligent systems, rainwater can be reliably used, without worrying about hygiene, for watering, irrigation, cleaning and other applications in areas which do not require potable water.
After all: Rainwater is excellently suited for irrigation and cleaning, since it is particularly lime-free, and is therefore better for absorbing mineral salts and active detergents.

Wilo-COE-2 EMHIL
COE-2 EMHIL

Design

Ready for connection, non self-priming water-supply unit with 2 parallel-switched, horizontally arranged high-pressure multistage centrifugal pumps with fixed speed in glanded design of the MHIL series, equipped with two ElectronicControl switchgears for speed control.

Application

  • Fully automatic water supply and pressure boosting in residential buildings and small commercial locations.
  • Pumping of drinking water and clean process water and other water mixtures that do not chemically or mechanically attack the materials used and do not contain any abrasive or long-fibre constituents

Special features / product benefits

  • Fully automatic water supply and pressure boosting in residential buildings and small commercial locations.
  • Pumping of drinking water and clean process water and other water mixtures that do not chemically or mechanically attack the materials used and do not contain any abrasive or long-fibre constituents

Technical data

  • Mains connection 1~ 230 V, 50 Hz/60 Hz
  • IE2 standard motor for 3~ 230 V, from 0.75 kW
  • Fuse A, AC 3 on mains side according to motor power and EVU regulations
  • Max. fluid temperature +50 °C
  • Operating pressure 10 bar
  • Inlet pressure 6 bar
  • R2'' nominal connection diameter
  • Protection class: IP 54
Wilo-COE-2 MHIL BC
COE-2 MHIL BC

Design

Ready for connection, non self-priming water-supply unit with 2 parallel-switched, horizontally arranged high-pressure multistage centrifugal pumps with fixed speed in glanded design of the MHIL series, equipped with BC switchgear.

Application

  • Fully automatic water supply and pressure boosting in residential buildings and small commercial locations.
  • Pumping of drinking water and clean process water and other water mixtures that do not chemically or mechanically attack the materials used and do not contain any abrasive or long-fibre constituents.

Special features / product benefits

  • Fully automatic water supply and pressure boosting in residential buildings and small commercial locations.
  • Pumping of drinking water and clean process water and other water mixtures that do not chemically or mechanically attack the materials used and do not contain any abrasive or long-fibre constituents.

Technical data

  • Mains connection 3~400 V, 50 Hz or 1~230 V, 50 Hz
  • IE2 standard motor for 3~ from 0.75 kW (for 1~ : IE1 standard motor)
  • Fuse A, AC 3 on mains side according to motor power and EVU regulations
  • Max. fluid temperature of +50 °C (+70 °C optional)
  • Operating pressure 10 bar
  • Inlet pressure 6 bar
  • R2'' nominal connection diameter
  • Protection class: IP 54
Wilo-COE-2 EMHIL
COE-2 EMHIL

Design

Ready for connection, non self-priming water-supply unit with 2 parallel-switched, horizontally arranged high-pressure multistage centrifugal pumps with fixed speed in glanded design of the MHIL series, equipped with two ElectronicControl switchgears for speed control.

Application

  • Fully automatic water supply and pressure boosting in residential buildings and small commercial locations.
  • Pumping of drinking water and clean process water and other water mixtures that do not chemically or mechanically attack the materials used and do not contain any abrasive or long-fibre constituents

Special features / product benefits

  • Fully automatic water supply and pressure boosting in residential buildings and small commercial locations.
  • Pumping of drinking water and clean process water and other water mixtures that do not chemically or mechanically attack the materials used and do not contain any abrasive or long-fibre constituents

Technical data

  • Mains connection 1~ 230 V, 50 Hz/60 Hz
  • IE2 standard motor for 3~ 230 V, from 0.75 kW
  • Fuse A, AC 3 on mains side according to motor power and EVU regulations
  • Max. fluid temperature +50 °C
  • Operating pressure 10 bar
  • Inlet pressure 6 bar
  • R2'' nominal connection diameter
  • Protection class: IP 54
Wilo-COE-2 MHIL BC
COE-2 MHIL BC

Design

Ready for connection, non self-priming water-supply unit with 2 parallel-switched, horizontally arranged high-pressure multistage centrifugal pumps with fixed speed in glanded design of the MHIL series, equipped with BC switchgear.

Application

  • Fully automatic water supply and pressure boosting in residential buildings and small commercial locations.
  • Pumping of drinking water and clean process water and other water mixtures that do not chemically or mechanically attack the materials used and do not contain any abrasive or long-fibre constituents.

Special features / product benefits

  • Fully automatic water supply and pressure boosting in residential buildings and small commercial locations.
  • Pumping of drinking water and clean process water and other water mixtures that do not chemically or mechanically attack the materials used and do not contain any abrasive or long-fibre constituents.

Technical data

  • Mains connection 3~400 V, 50 Hz or 1~230 V, 50 Hz
  • IE2 standard motor for 3~ from 0.75 kW (for 1~ : IE1 standard motor)
  • Fuse A, AC 3 on mains side according to motor power and EVU regulations
  • Max. fluid temperature of +50 °C (+70 °C optional)
  • Operating pressure 10 bar
  • Inlet pressure 6 bar
  • R2'' nominal connection diameter
  • Protection class: IP 54
Wilo-Economy COE-2 TWI 5
Economy COE-2 TWI 5

Design

Pressure boosting system with two parallel submersible pumps (suitable for installation outside water), vertical, non-self-priming, made of stainless steel, water-cooled and low-noise. Mounted on a base frame, with complete pipework including all hydraulic components, central switchgear, pressure switch and all cabling.

Application

Pressure boosting and water supply in residential applications and for small commercial installations where compact construction and a low noise level are necessary.

Special features / product benefits

Pressure boosting and water supply in residential applications and for small commercial installations where compact construction and a low noise level are necessary.

Technical data

  • Volume flow Qmax: 14 m3/h
  • Delivery head Hmax: 68m
  • Mains connection 3~400 V or 1~230 V ±10% 50 Hz
  • Fluid temperature max: +40°C
  • Operating pressure max: 10 bar
  • Nominal connection diameters G 2"
Wilo-EMHIL
EMHIL

Design

Non-self-priming water supply unit with frequency converter

Application

  • Water supply
  • Rainwater utilisation
  • Irrigation and spraying

Special features / product benefits

  • Water supply
  • Rainwater utilisation
  • Irrigation and spraying

Technical data

  • Maximum operating pressure: 10 bar
  • Max. fluid temperature: 40 °C
  • Min. fluid temperature:0 °C
  • Maximum ambient temperature: 50 °C
  • Mains connection: 1~230 V, 50/60 Hz
Wilo-HiPeri
HiPeri

Design

Non self-priming peripheral pump

Application

  • Water distribution/boosting
  • Raw water intake
  • Sprinkling and spraying
  • Rainwater utilisation

Special features / product benefits

  • Water distribution/boosting
  • Raw water intake
  • Sprinkling and spraying
  • Rainwater utilisation

Technical data

  • Max. fluid temperature: 60 °C
  • Ambient temperature: 40 °C
  • Max. operating pressure: 6.5 bar
  • Permanent or intermittent operation
  • Max. connections per hour: 20
  • Suction head: up to 8m
  • Insulation class: 155 (F)
  • Protection class: IPX4
  • Sound-pressure level: LpA < 70dBA
Wilo-Jet FWJ
Jet FWJ

Design

Self-priming water-supply units

Application

For pumping water and rainwater from wells and tanks for:

  • Sprinkling
  • Irrigation and spraying

Special features / product benefits

For pumping water and rainwater from wells and tanks for:

  • Sprinkling
  • Irrigation and spraying

Technical data

  • Mains connection 1~230 V, 50 Hz
  • Inlet pressure max. 1 bar
  • Switch-on pressure 1.5 bar to 2.7 bar
  • Switch-off pressure min. 2.2 bar
  • Fluid temperature +5 °C to +35 °C
  • Max. operating pressure 6 bar
  • Protection class IP 44
  • Pressure-side connection R 1
  • Suction-side connection G 1
Wilo-Jet HWJ
Jet HWJ

Design

Self-priming water-supply unit

Application

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Pumping water from wells and out of low-lying tanks

Special features / product benefits

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Pumping water from wells and out of low-lying tanks

Technical data

  • Mains connection 1~230 V, 50 Hz
  • Suction head max. 8 m
  • Inlet pressure max. 1 bar
  • Start-up pressure 1.5 bar
  • Variable switch-off pressure
  • Fluid temperature +5 °C to +35 °C
  • Max. operating pressure 6 bar
  • Protection class IP 44
  • Connection on pressure side Rp 1
  • Suction-side connection G 1
Wilo-Jet WJ
Jet WJ

Design

Self-priming multistage centrifugal pumps

Application

  • Pumping water from wells
  • Filling, pumping empty, transferring by pumping, irrigation and sprinkling
  • As emergency pump for overflows

Special features / product benefits

  • Pumping water from wells
  • Filling, pumping empty, transferring by pumping, irrigation and sprinkling
  • As emergency pump for overflows

Technical data

  • Mains connection 1~230 V, 50 Hz or 3~400 V, 50 Hz
  • Inlet pressure max 2 bar
  • Fluid temperature max. +5 °C to +35 °C
  • Max. operating pressure 6 bar
  • Protection class IP 44
  • Suction- and pressure-side connection G 1
Wilo-MultiCargo FMC
MultiCargo FMC

Design

Self-priming water-supply unit

Application

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Rainwater utilisation

Special features / product benefits

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Rainwater utilisation

Technical data

  • Mains connection 1~230 V, 50 Hz
  • Inlet pressure max. 1.5 bar
  • Switch-on pressure 1.5 bar to 2.7 bar
  • Switch-off pressure min. 2.2 bar
  • Fluid temperature +5 °C to +35 °C
  • Operating pressure max. 8 bar
  • Protection class IP 44
  • Pressure-side connection R 1
  • Suction-side connection Rp 1
Wilo-MultiCargo HMC
MultiCargo HMC

Design

Self-priming water-supply unit

Application

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Pumping water from wells and out of low-lying tanks

Special features / product benefits

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Pumping water from wells and out of low-lying tanks

Technical data

  • Mains connection 1~230 V, 50 Hz / 3~400 V, 50 Hz
  • Suction head max. 8 m
  • Inlet pressure max. 4 bar
  • Fluid temperature +5 °C to +35 °C
  • Operating pressure max. 8 bar
  • Pressure switch setting range 1-5 bar
  • Protection class IP 54
  • Suction- and pressure-side connection Rp 1
Wilo-MultiCargo MC
MultiCargo MC

Design

Self-priming multistage centrifugal pumps

Application

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Rainwater utilisation

Special features / product benefits

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Rainwater utilisation

Technical data

  • Mains connection 1~230 V, 50 Hz, 3~400 V, 50 Hz
  • Max. inlet pressure of 4 bar
  • Fluid temperature max. +5 °C to +35 °C
  • Max. ambient temperature of +40 °C
  • Max. operating pressure of 8 bar
  • Protection class 1~: IP X4; 3~: IP 54
  • Rp 1 connections on suction and pressure sides
Wilo-MultiPress FMP
MultiPress FMP

Design

Non-self-priming water-supply unit

Application

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Rainwater utilisation

Special features / product benefits

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Rainwater utilisation

Technical data

  • Mains connection 1~230 V, 50 Hz
  • Inlet pressure max. 1.5 bar
  • Switch-on pressure 1.5 bar to 2.7 bar
  • Switch-off pressure min. 2.2 bar
  • Fluid temperature +5 °C to +35 °C
  • Max. operating pressure 10 bar
  • Protection class IP 54
  • Pressure-side connection R 1
  • Suction-side connections Rp 1 for FMP3..; Rp 1¼ for FMP6..
Wilo-MultiPress HMP
MultiPress HMP

Design

Non-self-priming water-supply unit

Application

  • Water supply
  • Sprinkling
  • Irrigation and spraying

Special features / product benefits

  • Water supply
  • Sprinkling
  • Irrigation and spraying

Technical data

  • Mains connection 1~230 V, 50 Hz / 3~400 V, 50 Hz
  • Max. inlet pressure 6 bar
  • Fluid temperature +5 °C to +35 °C
  • Max. operating pressure 10 bar
  • Pressure switch setting range 1-5 bar
  • Protection class IP 54
  • Suction- and pressure-side connection Rp 1
Wilo-MultiPress MP
MultiPress MP

Design

Non-self-priming multistage centrifugal pumps

Application

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Rainwater utilisation

Special features / product benefits

  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Rainwater utilisation

Technical data

  • Mains connection 1~230 V, 50 Hz, 3~400 V, 50 Hz
  • Max. inlet pressure of 6 bar
  • Fluid temperature max. +5 °C to +35 °C
  • Max. ambient temperature of +40 °C
  • Max. operating pressure of 10 bar
  • Protection class 1~: IP X4; 3~: IP 54
  • Pressure-side connections Rp 1
  • Suction-side connections: Rp 1 for MP3..; Rp 1¼ for MP6..
Wilo-RainSystem AF 150
RainSystem AF 150

Design

Automatic rainwater utilisation system with run-down tank and 2 self-priming pumps

Application

Rainwater utilisation in multi-family houses and small trade businesses for saving drinking water in conjunction with cisterns or tanks

Special features / product benefits

Rainwater utilisation in multi-family houses and small trade businesses for saving drinking water in conjunction with cisterns or tanks

Technical data

  • Suction head max. 8 m
  • Operating pressure max. 8 bar
  • Protection class: IP 41
  • Connections:

    • Pressure pipe/pressure-side joint tubing R 1 ½
    • Suction side 2 x 1/4G 1
    • Inlets R 1 ¼
    • Overflow connection DN 100

Wilo-RainSystem AF 400
RainSystem AF 400

Design

Automatic rainwater utilisation system with run-down tank and 2 non-self-priming pumps

Application

Commercial and industrial rainwater utilisation for conserving drinking water as a hybrid system in conjunction with rainwater storage tanks or vessels

Special features / product benefits

Commercial and industrial rainwater utilisation for conserving drinking water as a hybrid system in conjunction with rainwater storage tanks or vessels

Technical data

  • Operating pressure max. 10 bar
  • Protection class: IP 54
  • Connections:

    • Pressure pipe/pressure-side joint tubing R 1 ½
    • Inflow pipe HT 50
    • Overflow connection DN 100

Wilo-RainSystem AF Basic
RainSystem AF Basic

Design

Ready-to-plug rainwater utilisation system

Application

Rainwater utilisation for saving drinking water in conjunction with cisterns or tanks

Special features / product benefits

Rainwater utilisation for saving drinking water in conjunction with cisterns or tanks

Technical data

  • Mains connection 1~230 V, 50 Hz
  • Suction head max. 8 m
  • Operating pressure max. 8 bar
  • Protection class IP 42
  • Connections:

    • Pressure pipe/pressure side Rp 1
    • Suction side R 1/ G 1
    • Drinking water replenishment R ¾
    • Connection overflow DN 70

Wilo-RainSystem AF Comfort
RainSystem AF Comfort

Design

Ready-to-plug rainwater utilisation system

Application

Rainwater utilisation for saving drinking water in conjunction with cisterns or tanks

Special features / product benefits

Rainwater utilisation for saving drinking water in conjunction with cisterns or tanks

Technical data

  • Mains connection 1~230 V, 50 Hz
  • Suction head max. 8 m
  • Operating pressure max. 8 bar
  • Protection class IP 42
  • Connections:

    • Pressure pipe/pressure side Rp 1
    • Suction side R 1/ G 1
    • Drinking water replenishment R ¾
    • Connection overflow DN 70

Wilo-Sub TWI 4
Sub TWI 4

Design

Multistage 4" submersible pump in tie strap version for vertical or horizontal installation

Application

  • For water and drinking water supply from boreholes and rainwater storage
  • Process water supply
  • For municipal water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water in industrial applications
  • For pumping water without long-fibre and abrasive constituents

Special features / product benefits

  • For water and drinking water supply from boreholes and rainwater storage
  • Process water supply
  • For municipal water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water in industrial applications
  • For pumping water without long-fibre and abrasive constituents

Technical data

  • Minimum Efficiency Index (MEI) to ≥ 0.7
  • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
  • Submerged operating mode: S1
  • Fluid temperature: 3‐30 °C
  • Minimum flow rate at motor: 0.1 m/s
  • Max. sand content: 50 g/m3
  • Max. number of starts: 20/h
  • Max. submersion depth: 350 m
  • Protection class: IP 68
  • Pressure connection: Rp 1¼ - Rp 2
Wilo-Sub TWI 5-SE Plug & Pump
Sub TWI 5-SE Plug & Pump

Design

Water-supply system with submersible pump, control and complete accessories

Application

  • Pumping from wells, rainwater storage tanks and vessels
  • Irrigation, sprinkling or pumping out
  • Water supply
  • Rainwater utilisation

Special features / product benefits

  • Pumping from wells, rainwater storage tanks and vessels
  • Irrigation, sprinkling or pumping out
  • Water supply
  • Rainwater utilisation

Technical data

  • Mains connection 1~230 V, 50 Hz
  • Fluid temperature +5 °C to +35 °C
  • Max. operating pressure 10 bar
  • Protection class: IP 68
  • Suction- and pressure-side connection Rp 1
Wilo-Sub TWI 5/TWI 5-SE
Sub TWI 5/TWI 5-SE

Design

5" submersible pump in stainless steel, multistage

Application

Submersible pumps

  • Pumping from wells, rainwater storage tanks and vessels
  • Irrigation, sprinkling and pumping out
  • Water supply
  • Rainwater utilisation

Special features / product benefits

Submersible pumps

  • Pumping from wells, rainwater storage tanks and vessels
  • Irrigation, sprinkling and pumping out
  • Water supply
  • Rainwater utilisation

Technical data

  • Mains connection 1~230 V, 50 Hz / 3~400 V, 50 Hz
  • Fluid temperature max. +5 °C to +35 °C
  • Max. operating pressure 10 bar
  • Protection class IP 68
  • Pressure-side connection Rp 1¼
  • Connection on suction side for SE version Rp 1¼
Wilo-Sub TWU 3
Sub TWU 3

Design

Multistage 3" submersible pump in tie strap version for vertical or horizontal installation

Application

  • For private water supply from boreholes, wells and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • For pumping water without long-fibre and abrasive constituents

Special features / product benefits

  • For private water supply from boreholes, wells and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • For pumping water without long-fibre and abrasive constituents

Technical data

  • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
  • Immersed operating mode: S1
  • Fluid temperature: 3-35 °C
  • Minimum flow rate at motor: 0.08 m/s
  • Max. sand content: 50 g/m3
  • Max. number of starts: 30 /h
  • Max. immersion depth: 150 m
  • Protection class: IP 58
  • Pressure connection: Rp 1
Wilo-Sub TWU 3 HS
Sub TWU 3 HS

Design

Multistage, frequency controlled 3" submersible pump in tie strap version for vertical or horizontal installation

Application

  • For private water supply from boreholes, wells and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • For pumping water without long-fibre and abrasive constituents

Special features / product benefits

  • For private water supply from boreholes, wells and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • For pumping water without long-fibre and abrasive constituents

Technical data

Submersible pump:

  • Supply voltage:
    HS-E…: 1~230 V, 50/60 Hz (connection to the AC mains supply by a frequency converter )
    HS-I…: 1~230 V, 50/60 Hz (direct connection to the AC mains supply)
  • Immersed operating mode: S1
  • Fluid temperature: 3-35 °C
  • Minimum flow rate at motor: 0.08 m/s
  • Max. sand content: 50 g/m3
  • Max. number of starts: 30 /h
  • Max. immersion depth: 150 m
  • Protection class: IP 58
  • Pressure connection: Rp 1

Frequency converter for version "HS-E…“:

  • Mains connection: 1~230 V, 50/60 Hz
  • Output: 3~230 V/max.140 Hz/max.2.2 kW
  • Fluid temperature: 3-50 °C
  • Max. pressure: 8 bar
  • Protection class: IP X5
  • Connection: G 1¼
Wilo-Sub TWU 3 Plug & Pump
Sub TWU 3 Plug & Pump

Design

Water-supply unit with submersible-motor pump, control and complete accessories.

Application

Water-supply unit for

  • Water supply from boreholes, wells and rainwater storage
  • Domestic water supply, sprinkling and irrigation
  • For pumping water without long-fibre and abrasive constituents

Special features / product benefits

Water-supply unit for

  • Water supply from boreholes, wells and rainwater storage
  • Domestic water supply, sprinkling and irrigation
  • For pumping water without long-fibre and abrasive constituents

Technical data

  • Mains connection: 1~230 V, 50 Hz
  • Immersed operating mode: S1
  • Fluid temperature: 3-35 °C
  • Minimum flow rate at motor: 0.08 m/s
  • Max. sand content: 50 g/m3
  • Max. number of starts: 30 /h
  • Max. immersion depth: 150 m
  • Protection class: IP 58
  • Pressure connection: Rp 1
Wilo-Sub TWU 4
Sub TWU 4

Design

Multistage 4" submersible pump in tie strap version for vertical and horizontal installation

Application

  • For water supply from boreholes and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water without long-fibre and abrasive constituents

Special features / product benefits

  • For water supply from boreholes and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water without long-fibre and abrasive constituents

Technical data

  • Minimum Efficiency Index (MEI) ≥ 0.7
  • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
  • Submerged operating mode: S1
  • Fluid temperature: 3‐30 °C
  • Minimum flow rate at motor: 0.08 m/s
  • Max. sand content: 50 g/m3
  • Max. number of starts: 20/h
  • Max. submersion depth: 200 m
  • Protection class: IP 68
  • Pressure connection: Rp 1¼ - Rp 2
Wilo-Sub TWU 4 Plug & Pump
Sub TWU 4 Plug & Pump

Design

Water-supply unit with submersible-motor pump, control and complete accessories.

Application

Water-supply unit for self-sufficient water supply in the domestic sector

  • Washing machines
  • Garden sprinkling
  • Transferring by pumping and filling
  • Taps for process water

Special features / product benefits

Water-supply unit for self-sufficient water supply in the domestic sector

  • Washing machines
  • Garden sprinkling
  • Transferring by pumping and filling
  • Taps for process water

Technical data

  • Minimum Efficiency Index (MEI) ≥ 0.7
  • Mains connection: 1~230 V, 50 Hz
  • Submerged operating mode: S1
  • Fluid temperature: 3‐30 °C
  • Minimum flow rate at motor: 0.08 m/s
  • Max. sand content: 50 g/m3
  • Max. number of starts: 20/h
  • Max. submersion depth: 200 m
  • Protection class: IP 68
  • Pressure connection: Rp 1¼
Wilo-Sub TWU 4-...-GT
Sub TWU 4-...-GT

Design

Multistage 4" submersible pump in tie strap version for vertical and horizontal installation

Application

  • Geothermal applications
  • For water supply from boreholes and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water without long-fibre and abrasive constituents

Special features / product benefits

  • Geothermal applications
  • For water supply from boreholes and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water without long-fibre and abrasive constituents

Technical data

  • Minimum Efficiency Index (MEI) ≥ 0.7
  • Mains connection: 3~400 V, 50 Hz,
  • Submerged operating mode: S1
  • Fluid temperature: 3‐30 °C
  • Minimum flow rate at motor: 0.08 m/s
  • Max. sand content: 50 g/m3
  • Max. number of starts: 20/h
  • Max. submersion depth: 200 m
  • Protection class: IP 68
  • Pressure connection: Rp 1¼
Wilo-Sub TWU 4-QC
Sub TWU 4-QC

Design

Multistage 4" submersible pump in tie strap version for vertical and horizontal installation

Application

  • For water supply from boreholes and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water without long-fibre and abrasive constituents

Special features / product benefits

  • For water supply from boreholes and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water without long-fibre and abrasive constituents

Technical data

  • Minimum Efficiency Index (MEI) ≥ 0.7
  • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
  • Submerged operating mode: S1
  • Fluid temperature: 3‐30 °C
  • Minimum flow rate at motor: 0.08 m/s
  • Max. sand content: 50 g/m3
  • Max. number of starts: 20/h
  • Max. submersion depth: 200 m
  • Protection class: IP 68
  • Pressure connection: Rp 1¼ - Rp 2
Share with others

How to contact us

We are glad to help you

If you have any questions, please contact us.

Working hours: Sunday till Thursday from 8:30 am to 5:30 pm.

Or send us your request: info@wilo.ae

T +97148809177

F +97148809188

Rainwater utilization

Pioneering for You